Strut channel - Air Source Treatment - China PU/PE/Pneumatic/Hydraulic tubes
Shapes Basic strut channel comes in the open box section
, 1 5/8 by 1 5/8 inch square cross section. A half height (1 5/8 inch wide, 13/16 inch tall) cross section version is also available, used mostly where mounted directly to a wall as it has significantly less stiffness and ability to carry loads across an open space or brace. A deep channel 2 7/16 inches tall and 1 5/8 inch wide is also manufactured. The material used to form the channel is typically 12 gauge (0.1046 inch) or 14 gauge (0.0747 inch) thick sheet metal. Several variations are available with different hole patterns for mounting to walls and supports. Solid channel has no holes predrilled, and must either be drilled on site or mounted in another fashion. Punched channel has round holes, large enough for 5/8 inch threaded steel rod or bolts, punched in the top of the channel at regular 1 7/8 inch centers. Half-slot channel has short, rounded end rectangular slots punched out on 2 inch centers. Slot channel has longer slots on 4 inch centers. In addition, shapes are manufactured with two lengths of channel welded together back to back, or three or four welded together in various patterns, to form stronger structural elements. Materials Strut is normally manufactured out of sheet steel, with a zinc coating (galvinized), paint, epoxy, powder coat, or other finishes. Somewhat more rarely, strut channel is manufactured from stainless steel or aluminum alloy, in cases where the strut rusting might become a problem (outdoors, chemical facilities with corrosive materials) or where weight is an issue (aluminum particularly). Interconnection The inwards-facing lips on the open side of strut channel are routinely used to mount special nuts, braces, connecting angles, and other types of interconnection mechanism or device to join lengths of strut channel together or connect pipes, wire, other structures, threaded rod, bolts, or walls into the strut channel structural system. Usage An overhead electrical wire hanger manufactured from two lengths of strut channel and two lengths of threaded rod. A length of standard half-slotted strut channel used as a brace, connected to a length of half-channel mounted directly to a wall, joined with a purpose-built channel connecting steel angle. A shelf supporting electrical conduit and pipe, manufactured from strut channel Strut channel is used to mount, brace, support, and connect lightweight structural loads in building construction. These include pipes, electrical and data wire, mechanical systems such as ventilation, air conditioning, and other mechanical systems. References ^ a b c Erico Product Catalog, 2009, Chapter 15 Strut, Fittings, and Accessories, ^ Grainger Strut Channel catalog, accessed 2009-08-05 ^ National Electrical Manufacturers Association page on Strut Channel, accessed 2009-08-05 ^ Cooper B-line Strut Catalog, accessed 2009-08-05 Categories: Structural engineering | Building materials
Strut channel - Air Source Treatment - China PU/PE/Pneumatic/Hydraulic tubes
By: xiao
inside and outside treatment Dandruff Causes and Treatment to get rid of Dandruff Panic disorder treatments: effective ways to get rid of panic disorder Premature Ejaculation Treatment and Stop Premature Ejaculation Immediately Panic disorder treatments and their symptoms Panic disorder treatments: Natural ways to prevent panic attacks Generic Casodex in Prostrate Cancer and Hirsutism Effective Anti Wrinkle Treatment of Deep Sea Cosmetics The Basic Concepts About Knee Pain Treatment Uncontrollable Male Climaxing Treatment – See This in case you Have to have a Solution This Evening! Water Treatment Corrosion Inhibition Of Sodium Humate Synergistic Effect Treat Toenail Fungus With This Effective Vinegar Nail Fungus Treatment Untimely Ejaculation Workouts - How to stop untimely sexual climax, pure treatment