Boat Maintenance Tips
Owning a boat is a great pleasure for any person. The water, the waves, the speed, and all the fun and family are the main draws of owning a boat. Of course it is not all fun. Boats can be expensive, and if you do not take care of them, you could be spending a lot more money than you have to. Most people would agree that spending money you do not have to is not fun. So if you own a boat or intend to buy one soon, you should read on to learn some great boat maintenance tips that will save you money in the long run.
The most important way to maintain your boat is to keep it clean inside and out. This includes the engine, hull, and interior. Keeping your boat clean will not only make it look good, it will ensure that it works well for years to come. Each of these three areas need their own special attention, so pay close attention to the following sections.
Cleaning the Interior
The interior of your boat should be cleaned regularly to prevent degradation as well. Clean any vinyl surfaces with soap and water. Clean carpets by first vacuuming and then using a steam cleaner. Start at one end of the boat and work towards the other when steam cleaning. This will prevent you from having to walk over the parts you have already cleaned, which can make it dirty again. Be sure to allow the carpets to fully dry before walking on them. Air the cabin out thoroughly so that it does not become musty.
Cleaning the Hull
To clean the hull of the boat, start by washing it with clean water. It is important to use regular water and not salt water, as this will wash away any salt water deposits. Once the boat is wet, begin scrubbing it with a good brush. A good brush will scrub away dirt and grime without damaging the finish. A good brush will also not rust or mold between cleaning.
Cleaning the Engine
Your boats engine or motor is the beating heart of the vessel. Without it working, you will be dead in the water. Your engine should be thoroughly degreased at the end of each season in preparation for the winter months. FIrst, select a degreaser that is appropriate for the task at hand. Light grease should be no problem for products such as WD-40. If you gave excessive build up, go for a stronger product such as Gunk. Once you have selected your degreaser, you should protect any of your engines electrical systems before treating it. Use tape to cover wires, contact points, and other parts of the electrical system. Once they are protected, clean the engine following the owner's manual and the directions on the degreaser of your choice.
Once you are done cleaning the engine, be sure that you reapply lube to any parts that need it. Your engine will thank you for this yearly degreasing. For more information about Gas Generators and Marine Generators, theres great information online.
by: Max Stanford