If this contamination is not taken seriously, it could then turn out to become a
green swimming pool because of the infestation of green algae in the water. This can be due to some chemical imbalance in the water. The fact which needs to be remembered is that algae multiplies within a short time and can harbor other organisms like bacteria in the water. Therefore, it is essential to clear the pool as early as possible.
It is essential to keep the pool water clean to have a good summer swimming experience. It can be easy to maintain the pool from any contamination but it becomes a problem to clear off the already contaminated water. It can become a major problem for the owner as it will make the environment unsafe and will also spoil the overall look of the surrounding area.
Hereunder are the steps which will help in clearing the algae from the pool water.
Make sure that you start the filter as soon as you complete the shock application in the pool. It is necessary to continuously run it for a day and to wash the filter atleast four times in a day. This is considered as the most important step in the process of cleaning the pool.
Check thoroughly to see if there is any algae still left at the sides and bottom of the pool. Brush them and then vacuum it properly to avoid the chances of the algae again forming in the water.
The first step in order to clean the green pool is to remove the debris from the pool which might have entered the pool due to wind, heavy rainfall, etc. Make sure that you check the alkalinity and pH water level. It has to be within the specified ranges to make sure that the water is suitable for swimming. If the chlorine level has dropped below the specified limit which is 1 PPM, then it is a clear indication that the water is not suitable for the health and skin. The pool supplies contain these testing chemicals and can be obtained from a local pool supplier in your area.
After testing the water and identifying that the pool is infested with algae then it is necessary to shock the water. Shock is not an electric shock but a very strong chemical which can kill bacteria. The dosage is recommended by the manufacturer which needs to be followed to kill the bacteria. It is vital to increase the dosage of shock if the issue is more serious.
You can keep on repeating the above steps to make sure that the pool is completely free from any contamination or bacteria. You can also add algaecide and check the chlorine level once a week to make sure that you do not suffer from the same depressing problem.
A pool equipment dealer working for Bargain Pool and Spa has written this article. For more detail about pool supplies here.