subject: Features of FT-10 Fuel Treatment [print this page] Features of FT-10 Fuel Treatment
1.FT-10 fuel treatment is a combination of effective additives which has proved to be extremely useful for less consumption of petrol and diesel. FT-10 can be mixed with leaded and non-leaded fuel and can be used in all the vehicles. It improves fuel average of all the vehicles.
2.SIt separates water element from the fuel, which results in protecting costly bearings for a long term use without a need to replace those.
3. It controls fungus generation in diesel which increases burning capacity of the fuel.
4. Its anti-gelling feature helps the vehicle to start easily even in the winter season.
5. It keeps the valves clean and non-sticky.
6. Quite economically, FT-10 in a two wheeler can ride the vehicle 5 kilometres extra mile.
7. Increased combustion of fuels and fuel mileage.
8. Disperses water and moisture in the fuel burns evenly and with fuel.
9. Provides superior lubrication of the cylinder which extends engine life.
10. Cleans the internal combustion engine while driving.
11. Dissolves and removes fuel lines Gum Deposits.
12. Improve Octane, dieseling prevention and Ping.
13. Protects against rust and corrosion of fuel system.
14. Prevents the formation of gums and resins fuel.
15. Improves overall engine performance.
16. Cleans carburetors and fuel injection.
17. Eliminates rough idle and staffing.
18. Reduce harmful emissions.
19. Prevents vapor lock.
FT-10 to clean the entire fuel system while driving. Removal of resins and the carburetor, fuel lines and fuel tank, the life spark plugs, fuel injection and catalytic systems is increasing.
After cleaning the system as well as FT-10, minimum and maximum stall removed. The fuel consumption is significantly reduced. Clean the carburetor or fuel injection to perform optimally, such as improved air and fuel mixtures.
FT-10 removes water and moisture from the fuel system, turn off the fuel line freeze-ups and the blockage caused by moisture in the lines. Water can be "created" the night when the tank is half full. Temperature changes can cause condensation. Stick to the inside of your fuel tank, mixing moisture in the fuel itself. Once in the engine cylinders, engine performance by rough idle and poor. FT-10 molecular breaks down and suspends moisture in the fuel burns more efficiently.
Due to improved engine efficiency, FT-10 protects the environment by increasing the efficiency of fuel combustion, providing a high oxidation state. harmful emissions such as carbon monoxide, hydrocarbons and dioxins are reduced. Independent verification of emissions of FT-10 has proved to be superior in reducing harmful emissions up to 100%.
FT-10 FUEL TREATMENT IN DIESEL AND PETROL ENGINES
The water goes down, allowing it to move through the security system.
Prevents fungus and bacteria accumulate in the fuel.
Reduces corrosion or rust formation.
Clean the nozzles and pump.
Decreases gelling and waxing.
FT-10 is unique in its field. It surpasses all other products in both diesel and petrol engine.
FT-10 FUEL TREATMENT IN FUEL STORAGE TANKS
One of the most serious problems associated with fuel oil is the long-term storage. The growth of fungi and bacteria cause serious leakage of fuel oil stored in the home or business (i.e., oil storage during the summer season). Clogged filters and lines or a complete failure of the automatic mechanisms can be eliminated by treating the oil with FT-10
welcome to Insurances.net (https://www.insurances.net)
