subject: Big Man Is Also Vulnerable To Teach You Proper Maintenance Of Complex Machines - Laminating Machine [print this page] Complex machine in office is widely used and very efficient, but do not think that the huge volume of complex machine, it will be a long life, and, like many high-tech office equipment, complex machine we need the proper use of the same and routine maintenance will make it live longer. Xiao Bian today to brief you on the proper use and maintenance of several complex machine method:
First, pay attention to the use of complex machine environment and a good post-maintenance. As the workload of a larger complex machine, it should be effective on a regular basis to do their maintenance, but also changes to the composite machine a good working environment. First of all, to ensure that complex machine work in a clean environment, as much as possible so that composite machines from dust, the same time, ensure the composite machine should be relatively dry working environment can not be wet at the same time not to put too complex machine on the top panel items, to avoid environment, or foreign body on Duplicator Impact. At the same time careful not to compound machines placed around the body or the machine hard objects, especially similar to the Paperclip Or pushpins like metal. Once these metals fall into the compound machine, ranging from the internal parts will scratch composite machine, heavy metal is exposed to allow the work of these circuit boards, resulting in pieces of work copiers internal electronic short-circuit strength to damage the composite machine.
In addition, during use, both in plug power supply, cables, or rule out the cardboard failure, have to be in the compound machine power is cut off before further action, live action will cause the current impact, it is easy to breakdown complex machine circuit boards. When doing regular maintenance, do not avoid the use of chemical solvents, and do not use the texture more hard damp cloth to clean the dust inside the compound machine, broken scraps of paper, stains, not to use similar paper products like facial tissue to clean the copier Internally, in order to avoid the scraps of paper left in the complex plane in.
The second is the correct operation and use. In addition to the steps, step by step in accordance with the correct operation of complex machines, they also need the right to use and settings. For example, put a simple paper also need to be careful. Correct placement of copy paper, not only can guarantee normal printing, you can effectively eliminate the phenomenon of copier paper jam. In use, the user should follow the instructions to copy the paper on the tray, ensuring that the machine is not in use of paper, and placed in the copy paper into the tray, we should pay attention to the location of formation of, and to ensure Do not put too full of paper, another tray of the rail should be transferred to the same width and paper. In addition, the need to adopt high-quality copy paper, and put paper in the process, first by waving the paper to see whether there are the foreign paper. When using the process, has a paper jam situation, should first turn off the power complex machine, laminating machine and then open the top cover, the jammed paper slowly pick out from the copier, and not forced to pull out the jammed paper, to avoid pulling process, the paper scratches the surface of the photosensitive drum.
In addition, the use of complex machine, do not directly close the complex machine, but should be within 40 minutes or so, make sure that no copy task, the composite machine power off. This can be achieved to save energy, and to ensure that the composite machine will not start frequently. If in 40 minutes, there is piecemeal copying task, the compound machine to work in the energy state, to avoid duplicating machine as a component caused by frequent starts and excessive wear and tear of aging.
In addition, note the use of consumables. Supplies used directly determine the imaging quality of the composite machine. If Toner Cartridge Is scratched, will not only affect the imaging result, when serious, but also caused damage inside the machine. Therefore, the protection of the cartridge is very important. First, place the drum unit. When the user out from the compound machine Toner Box, you need to be careful not to light touch the surface of photosensitive drum. Because of strong light will cause damage cartridge, when the bright light long after the photosensitive drum, will lead to failure of photosensitive drum, causing print failures. Therefore, in the place and time to pick up toner cartridges, toner cartridges must be properly placed in a dark place and be careful not to touch the drum. Because the hand may be permanently damaged oil drum surface, thereby affecting the reproduction effect.
Used toner cartridges also have to be selected. Because of poor toner will cause a lot of dust, which both the human body itself or on the copy machine will cause damage. Caused by poor quality of toner dust, easy to create complex machines within the conductive effect of the circuit board burned compound machine; Moreover, poor toner on the photosensitive drum will cause damage, resulting in scratches on the copy effect will cause great impact.
by: gaga
welcome to Insurances.net (https://www.insurances.net)
