subject: Baby Safety Gates For Toddlers [print this page] Small children are known for their wonderful exploration especially if their learning to walk. You know you can't stop them once they've started to walk. However, you can control them and reduce the chances of them meeting danger by installing a safety device in your house.
Babies are not aware when certain areas are off limits so you have to use baby safety gates. These would prevent them from falling from the stairs or meet accidents. There are typical sizes and styles specially designed to block areas like stairs, doorways, and other places that are dangerous to your young ones.
Using baby safety gates is very essential for a family that has babies. Your child will be safe and protected even if you are busy performing other chores in the house. Your main goal is to protect your baby all the time so baby safety gates come in handy. There are things that you need to consider when buying baby safety gates.
Knowing the exact type of gate must be done first before deciding to purchase a baby safety gate. If you do not choose carefully, the baby safety gates may prohibit you from doing the things that you need to do. You have to make it certain that you should still be able to do household chores even if the baby safety gates are placed in the house. Here are a few tips to help you decide.
1. Proper placement of baby safety gates It is very important to note the correct placement of the safety gates. For instance, you should not use pressure mounted type safety gates on stairs. Since these are only appropriate for blocking doors on rooms. You have to use hardware-mounted gates because they are durable and secure. These would prevent your baby from falling.
2.Type of construction Without a doubt, you want your baby safety gates to be strong and have a smooth and splinter-free finish. Wooden baby gate is strong and attractive. Just be sure to look for ones with rounded corners instead of sharper squared edges. A metal baby gate may be considered as the strongest, but wood gates still work best in most cases. Choosing between wood and metal comes down to a matter of personal preference.
3.Check the slats Make sure that you choose a baby gate with vertical slats. Although this gate is not made by leading baby safety gates manufacturers anymore, the horizontal slats can be easily climbed by your baby. Vertical slats should have no more than 2-3 inch gap between them. This will prevent your baby from getting their head trapped between the slats, and also from being able to get their foot caught up.
4. Get exact measurements Most people tend to forget getting the exact measurements of the areas where they want to put the safety gates. You have to accurately measure the spot where you plan to put the safety gate. Then note it down and bring the note with you when buying baby safety gates. This will help you get the desired gate as quickly and as accurate as possible.
by: Ferdinand Eusebio
welcome to Insurances.net (https://www.insurances.net)
