subject: How To Design Retro Bar Stools [print this page] Show romanization
Back in the retro style, retro bar stools can add an artistic touch to any modern bar. The great thing is the reaction that counts everything, and technical color so that anyone can design bar stool in this pattern. As long as it is tall enough to sit on, and look, close to art, you will have a stool that would speak for the retro trend. The following are plans for the design of your retro bar stool.
Tools and equipment needed:
* Paper
* Pencil
* Color markers
* The old bar stool. You can use the feces of metal (non-adjustable), or wood
* Plastic Seat
* Drill bit with minerals
* 02.01-inch piece of paper or sheets of 8x8-inch steel
* Screws
* Screwdrivers
* Round head bolts and nuts to match
* Paint Matching
Step 1 - Draw your design and colors
When you go to look for a seat to re-design, and search for shapes curved and comfortable design. You will replace the seat so that part is not necessary to be in the pattern of reaction. It should be the main frame in good condition with a seat that can replace easily.
Drawing on the stool on the paper a number of times, and with the signs, try some different colors for the seats. Bold with bright red, or polka dots were. Look around the room and chose the color that will brighten it without clashing with other colors.
Step 2 - Purchase a plastic chair molded
Go out to the hand or the means of cheap and buy a seat molded in the color you chose. Such seats can come from the plastic chairs in the open air, and the search for the design of rounded or curved. Should be in good shape enough to use without reform and with a base that can be installed on top of the stool.
Step 3 - attach the new headquarters of the Council
4 dig holes in the metal plate or through the bottom of the Chair and attach a metal plate or screws, with round-headed. If the screws stick up too far, and may be uncomfortable to sit on, in an attempt to break them a little bit.
Step 4 - Attach a new seat
Remove the original seat of the stool and attach a new one. Make sure that the seat will be stable when you put weight on it. Now you have a new, colored bar stool. Make the stool in the same way, perhaps with different colors if you want.
Step 5 - Paint the stool
Depending on the bar stool consists of praise for the paint or color variation on the seat.
* Wooden stool - the tape again, or any old paint, paint, then repaint.
* Metal stool - paint primer to the base metal legs, then, when the primer dries, paint and feces.
You can go out on the seat design and the search for something different, such as a motorcycle seat, or seat on the old tractor that you can paint a bright color. These are very popular, but it is difficult to contain the stool on its own.
by: umar
welcome to Insurances.net (https://www.insurances.net)
