subject: What reasons are there for your company to buy manufactured oil coolers? [print this page] It can be a dangerous oversight as over a long period if you continue to incorrectly cool heavy machinery you can cause serious damage, which can cost a company thousands of pounds to correct.
If your firm does not appreciate these types of oil coolers then here are things you may like to take into consideration, as compiled by GDM Coolers:
1) To start with, if your business has transformers then you can appreciate that excess heat can cause extensive damage. If the temperature of the transformer's winding hot spot is a lot higher than it should be, the excess heat can cause the transformer to fail prematurely. The installation of a cooling system will mean that the transformer's load capacity can improve its ability by demonstrating growth to disperse the electric current generated by the heat.
2) It is always useful to have background information of what is on offer regarding systems. Oil coolers come with two basic designs, there are the tube-and-fin coolers and the stacked plate coolers:
- The tube-and-fin type of coolers produce heat through the engine which is carried to the fins after being extracted through the tubes, it will be absorbed into the air which is directed from the cooler. This can sometimes give out a lot of random results and can quite often lead to minimal improvement to the cooler's overall efficiency.
- The stacked plate coolers, instead disperse heat by letting oil flow into different passages inside the stacked plates. Stacked style coolers are manufactured to cool the oil down by allowing air to flow, however the parts are placed so close together that they inhibit air flow in the cooler.
Overall it depends on your individual situation when it comes to which choice is the right one for your specific machinery. Therefore, you should discuss your own personal requirements with a organisation that produces manufactured oil coolers, such as GDM Coolers.
3) When your vehicle has an oil immersed transformer then you have two major choices. These are:
- Oil immersed natural cooling. With this system the core and the windings are kept immersed in oil and the transformer is cooled by the circulation of the oil. The radiators can provide extra cooling, which creates an increased surface area over which a large transformer can dissipate heat.
Oil immersed water cooling. In these kinds of system the transformer is cooled by an internal coil through which water flows. This method is only feasible if you have an easily available source of water, which is usually not the case, which explains the increasing shift towards the natural cooling method.
4) If you do decide to buy an oil cooler then it is vital that you oil the bearings routinely, as oiling and checking your cooler bearings can save you from potential stress and expensive bills. This should be done at least once a year for casual use, or several times a year for heavier use.
Hopefully, the tips in this article should help you to ensure that your machinery should enjoy a longer lifespan and your company will save a substantial amount of money.
What reasons are there for your company to buy manufactured oil coolers?
By: Jabbar Karlee
welcome to Insurances.net (https://www.insurances.net)
