subject: Is It Easy to Create a Boat Design? [print this page] Are you contemplating designing a boat? Are you wondering how hard it would be to design and build a boat? Designing and building a boat is not as hard as you would think, but there are a couple of things to consider first before you embark on your boat building endeavor.
The first thing that you will want to do is choose the line of the boat. Does the boat have a circular bottom or does it have flat curves? Boats that have a circular bottom are typically harder to build than boats that have flat curves.
The next thing to consider isthe hull of the boat. Is your boat going to have a flat bottom or a v-shaped hull. All of these things will impact the complexity of your boat design.
I would recommend that you use some simple CAD software thatis made to work specifically withdesigning boats. CAD stands for Computer Aided Design. This will help you avoid anyimperfections in the design. Make sure that youbuild your boat in accordance with your boat design which will help you avoid problems while building your boat.
When it comes to building the boat from the boat design it's not as difficult as you may think. All you really need to know is how to read a tape and mark your wood in the correct places. You will of course also need to know how to cut a straight line with a handsaw. You can choose whichever style of handsaw that you prefer whether it be a circular saw, table saw, or even a radical arm saw.
Make sure that you are a careful while cutting and bleed the lines by about a half an inch. This will allow you to sand down to the desired shape as noted in your boat design.
As long as you follow your boat design and have some patience then you shouldn't have any problems designing and building your own boat.
Is It Easy to Create a Boat Design?
By: Jimmy the Boatbuilder
welcome to Insurances.net (https://www.insurances.net)
