subject: Some Experience: How To Fight A Good Octavo Edition Offset Trademark [print this page] Offset press with eight open Print Alcohol, Drugs , Food , Beverages , Daily necessities and other products Package Or trademarks of low cost, simple operation, stable quality, convenient, etc., have now been widely adopted by small and medium sized printing companies.
The following about the actual work of make-up some of the issues to be considered.
1. Product packaging or design of most of the use of trademarks Computer Make , The output color separation film after printing down, and then the machine print. Make-up, whether by hand or electrical sub-make-up, should be considered after the printing process, such as cutting, embossing, hot stamping, laminating, etc. will be the impact of the former working procedure.
2. Standard wine or food, beverage packaging, are usually integrated within and outside the packaging. Paste in the bottle cap on the mark mainly by the standard and the standard two-part body. Cap marked irregular shape, and design complexity, most have to die. When the cap and body make-up standard standard to separate the standard can not be close to the body cap standard, between the cap leaving a reasonable standard die cutting, creasing the room.
3. Note that the size of the finished size. Mark makes up 8 to open a large version, the elapse of about 3mm of wool around the room bleeding, or, after cutting and cutting edge will be affected by white product quality.
4. If the marks on the bottom on the ground or flat screen, make-up when necessary to piece together the ground or flat screen. For example, the wine has marked the field below, make-up should be on the ground and the field angle of the angle to fit together, so that cut, the knife can cut out the upper and lower marks, there will be no white border problem.
5. Make-up to consider when opening paper cutting, how to determine Diao mouth problems. For the small octavo size paper (39cm 27cm) and large format octavo paper (30cm 42cm), if the spell is the full version of full along, and finished in the trademark side of the size of a 1.5cm not printed within the text, graphics in the space, you can borrow the white side of a printed Diao outlet location.
6. Hand-make-up is normally transparent film copy out of make-up coordinates for the. Make-up when the product size to be accurate, and placed upright, can not appear skewed. For a small mark, when placed in the make-up quantity, size appears to prevent make-up half-way confusion, should coordinate with transparent make-up, mark the mark in both directions on the vertical and horizontal fine lines, text, graphics part of the exact location.
7. Make-up, the request rules line, cross line, middle, dragging tip line, moldings, color blocks, Diao clearly mark the location of mouth, etc., and all lines should not mark the finished size, otherwise, cut can not afford to dirty lines, color blocks will affect the finished appearance of trademarks. If the long lines or blocks of color can be engraved Knife short; has been revised version proofing cream available in the PS version On be amended.
8. Color separation film makes up a large version of need, if the film is 16 open, 32 open, 64 open and other small size, you need to even the version of Mosaic, as film has a certain thickness between the film folding, easy drying PS version or copy film production office space when folded, so that Vacuum pump Unable to pull closer, leading to drying out of the plates produced out version, send virtual network, not the ink and other faults.
Solution: First, the output on your computer to open large version 8; Second, subtle make-up when cutting the actual situation, with the graver the thin film to avoid scratching the edge of collapse.
9. Trademarks or packaging products, mostly multi-color printing is only make-up and accurate in order to achieve accurate overlay. Make-up order:
(1) first, background, after the pressure of color;
(2) first fight light color, dark color after the fight;
(3) network trapping the text, lines, patterns of high precision, the first fight;
(4) the main color first fight, then fight a secondary color;
Test make-up the most effective way of quality Proofing , Spell out the version of the printed before, it had better be offset proofing, checking the accuracy of overlay, Ink Whether the design draft of Hue Color Consistent, whether the omission of such graphic lines, but also check the color, color color stack like C, M, Y, K value, providing customers accurate proofreading text, color. The true basis for design.
Some Experience: How To Fight A Good Octavo Edition Offset Trademark
By: ryyy
welcome to Insurances.net (https://www.insurances.net)
