subject: Linked Into The Reverse Gear Teeth To Fight Against The Causes And What To Avoid [print this page] Recently see a lot of friends in that hanging in his car when reverse gear teeth will be there to fight the phenomenon of transmission, "Kaka Ka" sound really makes listening very distressed. Edit car home today, you fight tooth analysis about the causes and how to avoid fighting tooth operation.
fight tooth damage: Fight tooth is actually between two metal texture of the head-gear, the end result was clear, that is causing part of the tooth crown accelerated wear a long time + several times, originally at right angles to the crown on was ground into a corner, into the block after the occlusion is not complete, and a little vibration is easy to block out the phenomenon appeared, this time on the need to overhaul a transmission.
Why fight the phenomenon of teeth?
This causes have to start talking about fighting tooth:
Manual transmission has a very important internal structure of the device, that is, "Synchronizer." The role of synchronizer is very obvious that when shifting gears as power output immediately want to change speed faster than the gear into the gear, if not synchronized to convert a slow spinning gear forced into a high-speed rotating gear, the fight will definitely happen tooth phenomenon.
Synchronizer is to shift the role of action occurs, will be for the rotation of gear into the gear and output gear to speed synchronous state, it will not shift when there is fighting tooth phenomenon.
Fight tooth understand the phenomenon, why so many cars driving forward play when there is no teeth, and a hanging gear into reverse gear hit it? That is because many models of the reverse gear is not installed reverse gear synchronizer, because the concept of manufacturers, the reverse gear is required and then linked into a complete halt, and the opportunity to use a lot of relatively small, so the structure for simplified transmission and cost-saving purposes, many low-end manual transmission in reverse gear no reverse gear synchronizer installed.
Not installed reverse gear synchronizer manual transmission into reverse gear will be playing there linked to the phenomenon of teeth. Of course, here too, and used to have a very large user relationship, because reverse gear synchronizer itself without the need to completely stop the vehicle so that power output and the reverse gear speed down to gear (which gear when the reverse gear is stationary ) smaller difference between the speed, so as to ensure the link, such as reverse gear did not play more smoothly and the tooth. Many users are not a parked car once hung on the rush into reverse gear, nature makes no reverse gear synchronizer is injured and will fight tooth occurred.
How to avoid reverse gear to fight tooth:
Said before, and reversing the car to a complete stop before re-hanging reverse gear is the best way to prevent the fighting teeth at the same time, be sure to completely step on the clutch in the end, must not be half as lazy and foot clutch, so that will cause a serious hit reverse gear teeth, and even even with the forward gear synchronizer are not overly superstitious synchronizer will make a very smooth shift, if you step on the clutch inadequately, even the best have to withstand the synchronizer big speed difference, synchronizer wear will accelerate geometric multiples.
Linked Into The Reverse Gear Teeth To Fight Against The Causes And What To Avoid
By: yaya
welcome to Insurances.net (https://www.insurances.net)
