subject: To check the battery factory and the shelf-life period [print this page] When reporters visited the learned, the general configuration of the regular cell phone battery manufacturers concentrated in the 650-1200mAh, which contained mainly to 800-1000mAh. However, most non-original brand battery capacity is about more than the 1200-1500mAh.
Market, pointed out that the former Dian including professional major brand battery manufacturers of Dian Chi Sheng Chan, on the quality and process control are more strict, factory Qian through the layers of testing, at safe performance in security problems, deal with vendors Yehuijishi Yu Yi , consumers can feel comfortable buying. However, some fake plants to meet consumer demand, the introduction of more than 4000mAh battery, because of process control is not very good, on the other hand there may be secondary battery renovation, without the authority of the department, a lower safety factor.
"Though they are marked with 4000mAh, 2000mAh perhaps may not even have the actual reach." Shenzhen Electronic Chamber of Commerce Deputy Secretary-General Chen Dayang noted that, due to faster cell phone replacement, such as battery capacity is often this kind of technical indicators do not note that the battery will not hold to the authority of the department for testing, so some unscrupulous vendors virtual standard battery capacity, in order to gimmicks to mislead the consumer. In the current technology level, the average cell phone battery, but also the highest capacity 1000mAh, can be achieved through the thick 1700-1800mAh. Capacity of more than 3000mAh battery, the manufacturers generally difficult to produce. How to choose mobile phone batteries
1. To check the factory and the shelf-life period. Chemical seal even without the use of dry conditions will naturally discharge, so when buying cell phone batteries should first check the battery and the durability of the factory. Laptop BatteryCamcorder Battery
2. To check its packaging and labeling compliance with national product quality. To check whether the place of origin, site and battery components, standards, capacity, important signs. Batteries should also look surface finish and factory security signs clarity carefully examined.
3. Use the new purchase of mobile phone batteries should first do the initial battery charge and discharge work. Initial charge time should generally be adequate without interruption for more than 10 hours, can be used only after adequate, fully discharge before charging again, otherwise it will affect battery life.
4. Select the designated battery. Lithium-ion batteries on the charger output voltage, current, stop demanding full testing and other parameters, the best selection of products designated mobile phone battery manufacturers.
To check the battery factory and the shelf-life period
By: combattery
welcome to Insurances.net (https://www.insurances.net)
