The Devlopment Of Honda The Vt250 Motorcycle
The VT250 or Spada MC20 was a Honda motorcycle built between late 1988 and the end of 1989
. The Spada's handling was enhanced due to its "CASTEC" cast aluminium frame, which is 5 kilograms (11 lb) lighter and over 30% stiffer than the previous steel version. It was geared to a theoretical top speed of 180 km/h (110 mph) with a 13,500 rpm redline. The VT250 Spada used Nissin brakes, Enkei wheels and a Showa rear-shock. It was designed by Mitsuyoshi Kohama, the designer also responsible for the first Fireblade, the NR750 and the Hornet. The model was principally marketed in Asia, Australia and New Zealand, although used models can also be found further afield, including Europe. Following the VT250 Spada, the Honda VTR250 was produced, which had a lower power output of 32 hp (24 kW) and a trellis frame in place of the cast aluminium frame.The VT250F is a semi-faired, sport bike first produced by Honda in 1982. The motorcycle had a DOHC 4-valve-per-cylinder, 90-degree water-cooled V-twin engine, which significantly reduced primary vibration when compared to inline twin engines used on similar machines. The V-twin engine also allowed the motorcycle to have a low centre of gravity and a low seat height. The front brake was a single inboard ventilated disc that was developed to improve brake performance and feel. This was only seen on Honda models for a few years, before a switch to sintered metal brake pads with the more traditional disc/caliper arrangement. Other features included a hydraulic clutch, Comstar wheels with tubeless tyres, TRAC anti-dive front forks and Pro-Link rear suspension. Engine coolant passed through one of the frame tubes. The early UK specification model had built-in front fairing indicators, and optional radiator side-cowls and belly pan. Following the VT250F, the VT250 Spada and VTR250 were produced.
The Honda VTR250 is a 90 V-twin motorcycle produced by Honda that has so far had one major revision. The original VTR250 was a faired model sold only in the USA and Canada from 1988 to 1990. The current model VTR250 is a naked bike, produced from 1997 to the present, available only in the Asia-Pacific region, and for 2009, Europe. The Honda Interceptor VTR250 was sold only in the United States from 1988 to 1990, with moderate changes occurring over the three model years. With a 249 cc four-stroke liquid-cooled DOHC V-twin engine and a six-speed transmission, VTR250 was the smallest of Honda's Interceptor line of motorcycles. The 1990 model had a 17-inch front wheel and the front disc brakes were external. The Honda Interceptor VTR250 was sold only in the United States from 1988 to 1990, with moderate changes occurring over the three model years. With a 249 cc four-stroke liquid-cooled DOHC V-twin engine and a six-speed transmission, VTR250 was the smallest of Honda's Interceptor line of motorcycles. The 1990 model had a 17-inch front wheel and the front disc brakes were external. For more info about Honda Motorcycle Fairings and Honda Fairings, please visit our website!
by: admin2012 Protecting Your Kids From The Sun While Playing Outdoors How to book hotels online at the lowest rates Stream NFL Watch Ravens vs Dolphins Online Live via PC How To Become Rich: Saving And Investing Promote The Events Online Through Event Web Design How To Buy Restaurant Gift Vouchers? Best Online Cooking Classes For Scholars Don't Freak Out About Your Bachelorette Trip In Mexico Read This Advice On How To Nab Great Bundles The Amazing Tourist Instructions To Enjoying A Action-packed Voyage In Puerto Vallarta Proper Integration Of Wedding Lightings To Make The Event Special Inspirational Ireland E*TRADE Review How to Cope When You Miss Your Cheating Ex Wife